Custom text stitch parameter
Example of a custom setting
"CustomTextStitchParameter": {
"Verdickung": 100.0,
"Teilung": 0,
"Unterleger": 0,
"VerstechenAb": 5.0,
"FadenSchneidenAb": 5.0,
"MitEinstichImUebergang": false,
"DeckStichDistanz": 0.4,
"UnterlegerDistanz": 2.0,
"UnterlegerStepplaengeMM": 2.0,
"UnterlegerStepplaengePro":
100.0,
"Uebergang": 14,
"VerstickTyp": 0,
"PunkteNieSchneiden": false,
"Randart": 0,
"MinLaenge": 1.0,
"MaxLaenge": 4.0,
"TeilungWert": 50,
"Stichlaenge": 4.0,
}
"Verdickung" -> Boldness
Function: Sets the letter boldness.
Works only with GiS “GFONT” fonts.
Parameter: Boldness in percent.
"Teilung" -> Division
0: no division
1: Simple division
2: Irregular division
3: Rhythm division
4: Angular division
5: Regular division
"RandArt" -> Edge Type
0: Smooth
1: Irregularly one-sided
2: Irregular on both sides
3: Stump
4: Spitz (Cone reversal)
"UnterlegerArt" -> Underlayer type
0: None
1: Middle
2: Contour
3:
Zigzag
4:
Zigzag-Middle
5:
Zigzag- Contour
"VerstechenAb"->
fixing stiches from xx mm
Function: Automatic for fixing
stiches from xx mm.
Parameter: Distance in mm; the
default value is 0.5
"FadenSchneidenAb"
Function: Automatic thread cutting
from xx mm
Parameter: Distance in mm; 0 means
always cutting
"MitEinstichImUebergang"
Function: Activates with stitch in
connection.
Parameter: true or false
"PunkteNieSchneiden" -> never cut dots
Function: Activates never cut dots.
Parameter: true or false
"Uebergang" -> Connection
Function: Sets the connection type.
Parameter: Index to the table below
0: Original
1: Optimal
2: Baseline (0%)
3: 10%
4: 20%
5: 30%
6: 40%
7: Middle (50%)
8: 60%
9: 70%
10: 80%
11: 90%
12: Ascender (100%)
13: Optimally horizontal
14: Automatic
"DeckStichDistanz" -> Distance
Function: sets the stitch density
Parameter: Distance in in 1/1000 mm
"UnterlegerDistanz" -> Underlay distance
Function: sets the stitch distance
of the underlayment
Parameter: Distance in in 1/1000 mm
"UnterlegerStepplaengeMM" -> Underlay
step length
Function: sets the stitch length for
quilting lines
Parameter: Distance in in 1/1000 mm
"UnterlegerStepplaengePro" -> Stitch
shortening for quilting lines
Function: sets stitch shortening in
% for quilting lines
Parameter: Shortening in percent